Particle 2

Does the Particle 2 receive MIDI clock?
Yes, firmware versions 2.1 and later sync to MIDI clock.
Fri, 24 Jul, 2020 at 2:23 PM
Particle: Saving a preset using a MIDI controller
To save a preset, send a MIDI program change message while holding down the PRESET / [SAVE] button.  To avoid overwriting one of your presets accidentally, ...
Wed, 19 Aug, 2020 at 7:56 PM
Particle Factory Reset
Use the following procedure to reset the Particle’s configuration data to factory default settings. This will erase any advanced configuration and contro...
Fri, 25 Feb, 2022 at 2:44 PM
How To Update Firmware - Particle 2
The Particle’s firmware can be updated via drag and drop using any Mac or PC. To download the firmware: 1. Go to
Fri, 18 Sep, 2020 at 10:32 PM
Particle: preset sound changed between versions 2.0 and 2.1
If your presets behave differently using tap tempo after updating from version 2.0.x to 2.1.0 or later, it is probably due to a change in tap tempo behavior...
Fri, 23 Apr, 2021 at 8:57 PM
Particle 2 trails do not work
The Particle 2 has trails parameters at the global and preset level.  If trails is not working in a preset, check that it was not saved with trails off. ...
Tue, 5 Oct, 2021 at 1:46 PM
Using the Particle 2 as a normal delay
The Particle can be used at a standard delay pedal.  It will act as a clean digital delay with any of these modes: DELAY + LFO mode with the PARAM knob ...
Thu, 10 Feb, 2022 at 12:12 PM
How do I know if my Particle 2 has the latest firmware?
Your pedal's firmware can be viewed in a .TXT file stored on the pedal's hard drive. To view this file, you will need a USB mini B cable and a compu...
Sun, 7 Nov, 2021 at 9:34 AM
Particle 2 - Expression Pedal Range Calibration
Calibrating your expression pedal with your Particle 2 will ensure that the pedal uses the entire minimum / maximum expression pedal range. This process i...
Mon, 21 Mar, 2022 at 4:59 PM
Particle 2 LEDs blink red on startup
In Particle firmware version 2.2 and later, blinks the preset LEDs on startup to show whether the input is (2 & 3) or stereo (1 & 4).  Using mono (T...
Tue, 17 Jan, 2023 at 12:54 PM