Red Panda LLC

This changed in firmware version 2.2. This was a holdover from the Context V1 delay+reverb algorithm.  The input signal and delay output are fed into th...

The Context's firmware can be updated via drag and drop using any Mac or PC. Downloading the new firmware 1. Go to http://www.redpandalab.com/downloa...

The Context 2 can handle line level signals and analog synths with no problem.  It can be configured for stereo or mono input with a variety of bypass modes...

The Context 2 cathedral is an updated version of the Context V1 cathedral algorithm.  The Context 2 has a higher sampling rate, lower noise, more headroom, ...

Setting DELAY and FDBK to 7:00 will turn off the delay.  A common source of confusion is to turn off only the delay, which will give you a resonant/...

Here is a starting point for a shoegaze reverse reverb sound.  For reference, listen to "While You Sleep" by My Bloody Valentine.  In general, you...

To turn off the delay, hold the SHIFT button and turn both the DELAY and FDBK knobs to 7:00 (minimum). Why do you need to turn down both knobs?  With t...

To turn off dynamics, hold the SHIFT button and move the HI knob to 12:00 (center).

Your pedal's firmware can be viewed in a .TXT file stored on the pedal's hard drive. To view this file, you will need a USB mini B cable and a compu...

The Context 2 comes from the factory configured for mono input and stereo output.  Use our web editor (requires Chrome browser) to configure it for stereo i...