MIDI
The Keith McMillen MIDI Expander only works with KMI products. It cannot be used to connect our products to MIDI DIN cables.
Wed, 30 May, 2018 at 2:28 PM
Our products are class-compliant USB MIDI devices. The following USB MIDI hosts have been tested and are verified to work with our products. Compute...
Sat, 1 Apr, 2023 at 10:17 AM
Our products are class-compliant USB MIDI devices. You can connect multiple USB MIDI devices, including MIDI controllers, synths, and our pedals, but the s...
Fri, 23 Apr, 2021 at 5:25 PM
Printable PDF is below. MIDI CC VALUE TRANSPOSITION MIDI CC VALUE TRANSPOSITION 40 -2 octave 64 Unison 41 -1 octave + M7 65 m2 42 -1 octave...
Sat, 1 Aug, 2020 at 3:42 PM
All of our pedals with USB ports work with the Disaster Area Designs Gen3 MIDI controllers. Use their gHost adapter and a micro USB cable to connect the pe...
Thu, 17 Sep, 2020 at 1:28 PM
Red Panda pedals with USB receptacles also support 1/4" TRS MIDI input via the CTRL port, with MIDI in on the tip. Use our web editor to configure the...
Fri, 30 Jun, 2023 at 5:30 PM
MIDI timing clock messages are used to synchronize multiple MIDI devices to a single clock transmitter. The clock is typically provided by a DAW in compute...
Fri, 24 Jul, 2020 at 2:39 PM
Common MIDI Continuous Controllers Our MIDI-capable pedals use a common set of MIDI continuous controllers to automate and control the footswitch actions. ...
Wed, 19 Aug, 2020 at 5:27 PM
The Disaster Area Designs micro.ghost is a simple USB MIDI host that allows you to connect one of our pedals to MIDI controllers with 5-pin DIN MIDI ports. ...
Wed, 26 Aug, 2020 at 8:53 PM
The Disaster Area Designs qCONNECT can support up to eight 1/4" TRS MIDI devices, one USB MIDI device, and 5-pin DIN. Read the qCONNECT manual to get ...
Thu, 26 Aug, 2021 at 3:53 PM