Context 2, Particle 2, Raster 2, Tensor


Blend knob will not go to 100% wet.  Dry signal is always present.


The pedal might be configured for "Analog + FX Level" bypass mode.

All of the pedals listed above have a blend knob that goes from 100% dry to 100% wet.  They also support different bypass modes.  "Analog + FX Level" bypass mode has a unity gain analog dry signal and the blend knob acts as an effect level control.  

You can check and change the bypass mode using our web editor:

We also have TouchOSC layouts for some of our products that can set the bypass mode.

Alternatively, you can do a factory reset to reset the bypass mode to its default setting.  Refer to the owner's manual of your pedal for instructions.